|
SDK：Android6.0.1 開發(fā)板：SC3817R
1、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\device\softwinner\astar-d7\bluetooth\bdroid_buildcfg.h #ifdef BLUETOOTH_RTK …… #else #ifndef _BDROID_BUILDCFG_H #define _BDROID_BUILDCFG_H
#define BTM_DEF_LOCAL_NAME "SINLINX-V2"
// SERVICE_CLASS:0x5A (Bit17 -Networking,Bit19 - Capturing,Bit20 -Object Transfer,Bit22 -Telephony) // MAJOR CLASS: COMPUTER // MINOR CLASS: TABLET #define BTA_DM_COD {0x1A, 0x01, 0x14}
#define BTIF_HF_SERVICES (BTA_HSP_SERVICE_MASK) #define BTIF_HF_SERVICE_NAMES { BTIF_HSAG_SERVICE_NAME } #endif #endif
2、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\device\softwinner\astar-d7\bluetooth\bt_vendor.conf # UART device port where Bluetooth controller is attached UartPort = /dev/ttyS1
# Firmware patch file location FwPatchFilePath = /system/vendor/modules/
# Firmware Name FwPatchFileName = bcm43438a0.hcd
（以下干掉！） #AP6476_PCM2_Setup=xx:00:xx:00:F4:01:00:xx:0F:00:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx #There are total 25 configure, the first one is Test_option. 00:40:1F:00, is frequency settings. #Just leave the field that you don??t want to change as ??xx?? #For more detail, please check BCM2076_PCM2_Setup_Command.pdf
#Example: hauwei 3G module 2048K clock #AP6476_PCM2_Setup=xx:00:00:00:40:1F:00:01:0f:0f:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
3、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\device\softwinner\astar-d7\bluetooth\vnd_astar-d7.txt BLUETOOTH_UART_DEVICE_PORT = "/dev/ttyS1" FW_PATCHFILE_LOCATION = "/system/vendor/modules/" LPM_IDLE_TIMEOUT_MULTIPLE = 5 UART_TARGET_BAUD_RATE = 1500000 BT_WAKE_VIA_PROC = TRUE #LPM_SLEEP_MODE = FALSE BTVND_DBG = TRUE BTHW_DBG = TRUE VNDUSERIAL_DBG = TRUE UPIO_DBG = TRUE #SCO_PCM_IF_CLOCK_RATE = 2
4、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\device\softwinner\astar-d7\astar_d7.mk PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.camera.xml:system/etc/permissions/android.hardware.camera.xml \ frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \ frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \ frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml
# camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-d7/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini
PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 \ ro.sys.mutedrm=true \ rw.logger=0
#$(call inherit-product-if-exists, vendor/google/products/gms_base.mk)
#for 8723bs-vq0,should setmacaddr #PRODUCT_PACKAGES += setmacaddr
#for 8723bs-vq0,should setbtmacaddr #PRODUCT_PACKAGES += setbtmacaddr
5、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\device\softwinner\astar-d7\BoardConfig.mk # 1.2 broadcom wifi support # BOARD_USR_WIFI:ap6181/ap6210/ap6212/ap6330/ap6335 BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path"
BOARD_USR_WIFI := ap6212 include hardware/broadcom/wlan/bcmdhd/firmware/$(BOARD_USR_WIFI)/device-bcm.mk
endif
# 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor # BOARD_HAVE_BLUETOOTH_NAME:rtl8723bs/rtl8723bs_vq0/rtl8723cs/ap6210/ap6212/ap6330/ap6335/ BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_BCM := true BOARD_HAVE_BLUETOOTH_NAME := ap6212
6、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\device\softwinner\astar-d7\init.sun8i.rc # tp & sensors init_dev_detect
on post-fs-data mkdir /data/media 0770 media_rw media_rw
# bluetooth MAC address programming #chown bluetooth net_bt_stack ro.bt.bdaddr_path #chown bluetooth net_bt_stack /system/etc/bluetooth #chown bluetooth net_bt_stack /data/misc/bluetooth #setprop ro.bt.bdaddr_path "/data/misc/bluetooth/bdaddr"
7、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\device\softwinner\astar-d7\ueventd.sun8i.rc #/dev/video1 0777 media media /dev/snd/pcmC0D0c 0777 media media /dev/snd/pcmC0D0p 0777 media media /dev/ttyS1 0660 bluetooth bluetooth
8、為了調(diào)試方便可選：休眠半小時(shí)+禁止鎖屏！ Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml <integer name="def_screen_off_timeout">1800000</integer> <bool name="def_lockscreen_disabled">true</bool>
9、（不用修改：） Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6212\bcm43438a0.hcd Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6212\device-bcm.mk -include hardware/broadcom/wlan/bcmdhd/config/config-bcm.mk
WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm43438a0.bin" WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm43438a0_apsta.bin" WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm43438a0_p2p.bin"
PRODUCT_COPY_FILES += \ hardware/broadcom/wlan/bcmdhd/firmware/ap6212/fw_bcm43438a0.bin:system/vendor/modules/fw_bcm43438a0.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6212/fw_bcm43438a0_apsta.bin:system/vendor/modules/fw_bcm43438a0_apsta.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6212/fw_bcm43438a0_p2p.bin:system/vendor/modules/fw_bcm43438a0_p2p.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6212/nvram_ap6212.txt:system/vendor/modules/nvram.txt \ hardware/broadcom/wlan/bcmdhd/firmware/ap6212/bcm43438a0.hcd:system/vendor/modules/bcm43438a0.hcd
Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6212\fw_bcm43438a0.bin Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6212\fw_bcm43438a0_apsta.bin Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6212\fw_bcm43438a0_p2p.bin Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6212\nvram_ap6212.txt
Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java
10、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\lichee\linux-3.4\arch\arm\mach-sunxi\rf\bt_pm.c static int rfkill_set_power(void *data, bool blocked) { unsigned int mod_sel = wifi_pm_get_mod_type();
RF_MSG("rfkill set power %d\n", blocked);
switch (mod_sel) { …… case 9: /* ap6212 */ if (!blocked) { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 1); } else { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 0); } break; default: RF_MSG("no bt module matched !!\n"); }
msleep(10); return 0; }
11、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\lichee\linux-3.4\arch\arm\mach-sunxi\rf\wifi_pm.c struct wifi_pm_ops wifi_select_pm_ops; static char* wifi_mod[] = {" ", "ap6181", /* 1 - AP6181*/ "ap6210", /* 2 - AP6210*/ "rtl8188eu", /* 3 - RTL8188EU*/ "rtl8723au", /* 4 - RTL8723AU*/ "rtl8723bs", /* 5 - RTL8723BS*/ "esp8089", /* 6 - ESP8089*/ "ap6476", /* 7 - AP6476*/ "rtl8189es", /* 8 - rtl8189es*/ "ap6212", /* 9 - AP6212*/ "ap6330", /* 10- AP6330*/ "gb9663", /* 11- GB9663*/ };
static int __devinit wifi_pm_probe(struct platform_device *pdev) { struct wifi_pm_ops *ops = &wifi_select_pm_ops;
switch (ops->module_sel.val) { …… case 9: /* AP6212 */ ap6xxx_gpio_init(); break; default: wifi_pm_msg("wrong sdio module select %d !\n", ops->module_sel.val); }
awwifi_procfs_attach(); wifi_pm_msg("wifi gpio init is OK !!\n"); return 0; }
12、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\lichee\linux-3.4\drivers\net\wireless\bcmdhd\include\bcmdevs.h #define BCM4350_CHIP_ID 0x4350 #define BCM43430_CHIP_ID43430/* 43430 chipcommon chipid 0xa9a6 */
#define BCM4342_CHIP_ID 4342
13、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_common.c void dhd_common_init(osl_t *osh) { int select_type = 0; //aw checkout which wifi had select //select_type = wifi_pm_get_mod_type(); select_type = 9; #ifdef CONFIG_BCMDHD_FW_PATH //select ap6181 or ap6210 or ap6476 if (select_type == 1 || select_type == 2 || select_type == 7) { bcm_strncpy_s(fw_path, sizeof(fw_path), "/system/vendor/modules/fw_bcm40181a2.bin", MOD_PARAM_PATHLEN-1); } #else /* CONFIG_BCMDHD_FW_PATH */ fw_path[0] = '\0'; #endif /* CONFIG_BCMDHD_FW_PATH */ #ifdef CONFIG_BCMDHD_NVRAM_PATH switch (select_type) { //ap6181 case 1: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6181.txt", MOD_PARAM_PATHLEN-1); break;
//ap6210 case 2: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6210.txt", MOD_PARAM_PATHLEN-1); break;
//ap6476 case 7: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6476.txt", MOD_PARAM_PATHLEN-1); break; //ap6212 case 9: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram.txt", MOD_PARAM_PATHLEN-1); break; default: break; } #else /* CONFIG_BCMDHD_NVRAM_PATH */ nv_path[0] = '\0'; #endif /* CONFIG_BCMDHD_NVRAM_PATH */ #ifdef CONFIG_BCMDHD_CONFIG_PATH bcm_strncpy_s(conf_path, sizeof(conf_path), "/system/vendor/modules/config.txt", MOD_PARAM_PATHLEN-1); #else /* CONFIG_BCMDHD_CONFIG_PATH */ conf_path[0] = '\0'; #endif /* CONFIG_BCMDHD_CONFIG_PATH */ #ifdef SOFTAP fw_path2[0] = '\0'; #endif }
14、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_linux.c int dhd_bus_start(dhd_pub_t *dhdp) { int ret = -1; dhd_info_t *dhd = (dhd_info_t*)dhdp->info; unsigned long flags;
ASSERT(dhd);
DHD_TRACE(("Enter %s:\n", __FUNCTION__));
#ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdlock(dhdp); #endif /* DHDTHREAD */
/* try to download image and nvram to the dongle */ if ((dhd->pub.busstate == DHD_BUS_DOWN) && (fw_path[0] != '\0') && (nv_path[0] != '\0')) { #ifdef SHOW_NVRAM_TYPE { /* Show nvram type in the kernel log */ int i; for (i = 0; nv_path[i] != '\0'; ++i) { if (nv_path[i] == '.') { ++i; break; } } DHD_ERROR(("%s: nvram_type = [%s]\n", __FUNCTION__, &nv_path[i])); } #endif /* SHOW_NVRAM_TYPE */ /* wake lock moved to dhdsdio_download_firmware */ if (!(dhd_bus_download_firmware(dhd->pub.bus, dhd->pub.osh, fw_path, nv_path, conf_path))) { DHD_ERROR(("%s: dhdsdio_probe_download failed. firmware = %s nvram = %s config = %s\n", __FUNCTION__, fw_path, nv_path, conf_path)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ // 2017/6/23 18:40 wenyuanbo download ap6212 fail not return error!!!! //return -1; } } if (dhd->pub.busstate != DHD_BUS_LOAD) { #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ return -ENETDOWN; }
……
return 0; }
15、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_sdio.c static bool dhdsdio_chipmatch(uint16 chipid) { …… if (chipid == BCM4350_CHIP_ID) return TRUE; if (chipid == BCM43430_CHIP_ID) return TRUE; return FALSE; }
16、 Z:\home\rediron\sina33m\ap6212a0_a33_sc3817\lichee\tools\pack\chips\sun8iw5p1\configs\d7\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo1_vol = 3300 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800
[jtag_para] jtag_enable = 0
[dram_para] dram_clk = 552
[uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PF02<3><1><default><default> uart_rx = port:PF04<3><1><default><default>
[uart1] uart_used = 1 uart_port = 1 uart_type = 4 uart_tx = port:PG06<2><1><default><default> uart_rx = port:PG07<2><1><default><default> uart_rts = port:PG08<2><1><default><default> uart_cts = port:PG09<2><1><default><default>
[uart2] uart_used = 1 uart_type = 4 uart_tx = port:PB00<2><1><default><default> uart_rx = port:PB01<2><1><default><default> uart_rts = port:PB02<2><1><default><default> uart_cts = port:PB03<2><1><default><default>
[ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1
ctp_int_port = port:PL04<4><default><default><default> ctp_wakeup = port:PL03<1><default><default><1> ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io =
[ctp_list_para] ctp_det_used = 1 ft5x_ts = 1 gt82x = 1 gslX680 = 1 gslX680new = 0 gt9xx_ts = 1 gt9xxf_ts = 0 tu_ts = 0 gt818_ts = 1 zet622x = 1 aw5306_ts = 1 icn83xx_ts = 0
[motor_para] motor_used = 0
[lcd0_para] lcd_used = 1
lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0
deu_mode = 0 lcdgamma4iep = 22 smart_color = 90
lcd_bl_en = port:PD13<1><0><default><1> ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;lcd_bl_en = port:PL06<1><0><default><1> lcd_power = "axp22_dc1sw"
lcdd0 = port:PD18<3><0><default><default> lcdd1 = port:PD19<3><0><default><default> lcdd2 = port:PD20<3><0><default><default> lcdd3 = port:PD21<3><0><default><default> lcdd4 = port:PD22<3><0><default><default> lcdd5 = port:PD23<3><0><default><default> lcdd6 = port:PD24<3><0><default><default> lcdd7 = port:PD25<3><0><default><default> lcdd8 = port:PD26<3><0><default><default> lcdd9 = port:PD27<3><0><default><default>
;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00<2><0><default><default>
[pwm1_para] pwm_used = 1 pwm_positive = port:PH01<2><0><default><default>
[usbc0] usb_used = 1 usb_port_type = 2 usb_detect_type = 1 usb_id_gpio = port:PD10<0><1><default><default> usb_det_vbus_gpio = "axp_ctrl" usb_drv_vbus_gpio = port:power4<1><0><default><0> usb_restrict_gpio = usb_host_init_state = 0 usb_restric_flag = 0 usb_restric_voltage = 3550000 usb_restric_capacity= 5 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_regulator_id_vbus = "axp22_dcdc1" usb_regulator_id_vbus_vol = 3000000
[usbc1] usb_used = 1 usb_drv_vbus_gpio = port:PD12<1><0><default><0> usb_restrict_gpio = usb_host_init_state = 1 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0
;-------------------------------------------------------------------------------- ;wifi/bt/fm/gps/nfc modules configuration ;module_num: ; 0- none ; 1- ap6181(wifi) ; 2- ap6210(wifi+bt) ; 3- rtl8188eu(wifi) ; 4- rtl8723au(wifi+bt) ; 5- rtl8723bs(wifi+bt) ; 6- esp8089(wifi) ; 7- ap6476(wifi+bt+fm+gps) ; 8- rtl8189es(wifi) ; 9- ap6212(wifi+bt+fm) ; 10- ap6330(wifi+bt+fm) ; 11- gb9663(wifi+bt+fm) ;module_power1: ""- bat, "axp_dldo1"- axp dldo1 ;module_power1_vol: power1 voltage, mv; not used for module_power1 is "" ;module_power2: ""- bat, "axp_dldo2"- axp dldo2 ;module_power2_vol: power2 voltage, mv; not used for module_power2 is "" ;module_power3: ""- bat, "axp_dldo2"- axp dldo2 ;module_power3_vol: power3 voltage, mv; not used for module_power3 is "" ;power_switch: module power switch io when bat supply ;chip_en: enable chip io ;lpo_use_apclk: ""- not use, "losc_out"- a23/33, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80/a83 ;-------------------------------------------------------------------------------- [rf_para] module_num = 9 module_power1 = "axp22_dldo1" module_power1_vol = 3000000 module_power2 = "axp22_dldo2" module_power2_vol = 3000000 module_power3 = "axp22_aldo1" module_power3_vol = 3000000 power_switch = chip_en = lpo_use_apclk = "losc_out"
;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_used: 0-not use, 1- use ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wl_reg_on: wifi function enable io ;wl_host_wake: wifi device wake-up host ;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wifi_mod_sel = 2 wifi_power = "" wifi_power_ext1 = "" wifi_power_ext2 = ""
; 1 - ap6181 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ;ap6xxx_lpo_use_apclk = 1
; 2 - ap6210 sdio wifi gpio config ap6xxx_wl_regon = port:PL06<1><default><default><0> ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ap6xxx_bt_regon = port:PL08<1><default><default><0> ap6xxx_bt_wake = port:PL10<1><default><default><0> ap6xxx_bt_host_wake = port:PL09<4><default><default><0> ap6xxx_lpo_use_apclk = 1
; 3 - rtl8188eu usb wifi gpio conifg
; 4 - rtl8723au usb wifi + bt
; 5 - rtl8723bs sdio wifi + bt ;rtl8723bs_chip_en = port:PL11<1><default><default><0> ;rtl8723bs_wl_regon = port:PL06<1><default><default><0> ;rtl8723bs_wl_host_wake = port:PL07<4><default><default><0> ;rtl8723bs_bt_regon = port:PL08<1><default><default><0> ;rtl8723bs_bt_wake = port:PL10<1><default><default><0> ;rtl8723bs_bt_host_wake = port:PL09<4><default><default><0> ;rtl8723bs_lpo_use_apclk = 0
; 6 - eagle sdio wifi ;esp_wl_chip_en = port:PL03<1><default><default><0> ;esp_wl_rst = port:PL02<1><default><default><0>
; 7 - ap6476 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ;ap6xxx_bt_regon = port:PL08<1><default><default><0> ;ap6xxx_bt_wake = port:PL10<1><default><default><0> ;ap6xxx_bt_host_wake = port:PL09<4><default><default><0> ;ap6xxx_lpo_use_apclk = 1
; 8 - rtl8189es sdio wifi gpio conifg ;rtl8189es_shdn = port:PL06<1><default><default><0> ;rtl8189es_host_wake = port:PL07<4><default><default><0>
usb_vbus_power_ctrl = port:PL11<1><default><default><1> usb_eth_power_ctrl = port:PL04<1><default><default><1>
;-------------------------------------------------------------------------------- ;bluetooth configuration ;bt_used: 0- no used, 1- used ;bt_uard_id: 0- uart0, 1- uart1, 2- uart2 ;bt_rst_n: bt function enable io ;bt_wake: host wake-up bluetooth device ;bt_wak_host: bt device wake-up host ;bt_wake_invert: whether bt_wake use inverter between ap and module ; 0: not used, 1: used ;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [bt_para] bt_used = 1 bt_uart_id = 1 bt_rst_n = port:PL08<1><default><default><0> bt_wake = port:PL10<1><default><default><0> bt_host_wake = port:PL09<4><default><default><0> （這里必須修改，否則BT打不開的，折騰了一個(gè)下午?。?/p> bt_wake_invert = 0 bt_host_wake_invert = 0 ls_int = port:PB07<1><default><default><0> pcm_ch = port:PB05<1><default><default><0> |
|
|
