[ubuntu] KVM/libvirt VM console access?

亞典波羅的收藏 2012-02-20

展開全文

Virtualization
For questions on VMWare, VirtualBox, Xen, QEMU and other virtualization software.

May 14th, 2009	#1
z0mbix 5 Cups of Ubuntu Join Date: Nov 2004 Location: Harrow, UK Beans: 15 Ubuntu 10.04 Lucid Lynx	KVM/libvirt VM console access? I'm setting up KVM and libvirt on hardy. Everything is working ok if I use VNC to install the hosts, but I wish to use the cli to administer these VMs instead of VNC. I have the following VMs running: root@vm-host-dmz:~# virsh list Connecting to uri: qemu:///system Id Name State ---------------------------------- 28 DevVM-01 running 30 DevVM-02 running When I try to access the console, I get the following error: root@vm-host-dmz:~# virsh console DevVM-01 Connecting to uri: qemu:///system No console available for domain root@vm-host-dmz:~# I want the KVM equivalent of xm console DevVM-01. How can I setup console access? If I define a console in the xml config file and virsh define it, the console settings just get removed.

May 14th, 2009	#2
geekshlby 5 Cups of Ubuntu Join Date: May 2009 Beans: 19	Re: KVM/libvirt VM console access? Check to determine if a console is defined for a VM: virsh ttyconsole DevVM-01 If null is returned define one: virsh edit DevVM-01 Example working console: Code: <serial type='pty'> <source path='/dev/pts/2'/> <target port='0'/> </serial> <console type='pty' tty='/dev/pts/2'> <source path='/dev/pts/2'/> <target port='0'/> </console> Note: using "virsh edit" will check syntax and redefine the VM for you once you exit the editing environment. Last edited by geekshlby; May 14th, 2009 at 04:51 PM..

May 14th, 2009	#3
z0mbix 5 Cups of Ubuntu Join Date: Nov 2004 Location: Harrow, UK Beans: 15 Ubuntu 10.04 Lucid Lynx	Re: KVM/libvirt VM console access? Thanks for the reply. I'm running Hardy. virsh doesn't seem to have the edit command. I have libvirt-bin version 0.4.0-2ubuntu8.1. Any other ideas? Maybe hardy's older version or libvirt-bin doesn't support consoles.

May 15th, 2009

vertigo23

5 Cups of Ubuntu

Join Date: Jan 2006

Beans: 22

Re: KVM/libvirt VM console access?

I'm running hardy also, and adding the <serial> and <console> devices isn't working for me. Here's my domain XML:

Code:

<domain type='kvm' id='2'>
  <name>mp-testbed01</name>
  <uuid>b996eded-ed4c-d6b6-d28d-13443849070e</uuid>
  <memory>262144</memory>
  <currentMemory>262144</currentMemory>
  <vcpu>1</vcpu>
  <os>
    <type>hvm</type>
    <boot dev='hd'/>
  </os>
  <devices>
    <emulator>/usr/bin/kvm</emulator>
    <disk type='file' device='disk'>
      <source file='/home/AUTOHOME/alex/VMs/p4-hot/root.qcow2'/>
      <target dev='hda' bus='ide'/>
    </disk>
    <interface type='network'>
      <mac address='52:54:00:e7:35:c2'/>
      <source network='default'/>
      <target dev='vnet1'/>
    </interface>
    <input type='mouse' bus='ps2'/>
    <graphics type='vnc' port='5900' listen='10.10.4.57'/>
    <serial type='pty'>
     <source path='/dev/pts/2'/>
     <target port='0'/>
    </serial>
    <console type='pty' tty='/dev/pts/2'>
     <source path='/dev/pts/2'/>
     <target port='0'/>
    </console>
  </devices>
</domain>

When I run "virsh define domain.xml", it doesn't error, but neither the serial nor the console sections show up when I then dump the XML in virsh.

May 31st, 2009	#5
Blinkiz Just Give Me the Beans! Join Date: Apr 2006 Location: Stockholm, Sweden My beans are hidden! Ubuntu	Re: KVM/libvirt VM console access? am also looking for the answer to this. So am bumping this one and subscribing to this thread.

September 24th, 2009	#6
netangel First Cup of Ubuntu Join Date: Dec 2007 Beans: 5	Re: KVM/libvirt VM console access? There is a solution. Just after starting the VM, you can do : Code: sudo tail /var/log/libvirt/qemu/<vm_name>.log Here is a sample reply : Code: /usr/bin/kvm -M pc -m 2048 -smp 4 -monitor pty -drive file=/var/lib/libvirt/images/<vm_name>.img,if=ide,boot=on -net nic,macaddr=00:16:ff:09:28:1e,vlan=0 -net tap,fd=4,script=,vlan=0 -usb -vnc 127.0.0.1:1 char device redirected to /dev/pts/1 The last line is really important. It tells you that kvm console is accessible to /dev/pts/X tty. Here, X is 1. Install the socat command (sudo apt-get install socat) and type in : Code: sudo socat - /dev/pts/1 You are now connected to kvm console. Type for example : Code: info snapshots or any other kvm command. BE CAREFUL, to exit from that console, just press Ctrl+C (to quit socat actually). My problem now is when the VM has run for a while, there is no more the "char device redirected to /dev/pts/X" in the logs ... so I search a method to retreive the actual pts which the VM points to. If you look at the file descriptors of the kvm VM (lsof -p <kvm_process_number>, you found : Code: ... kvm 6249 root 10u CHR 5,2 1675 /dev/ptmx ... The process has opened /dev/ptmx. The problem I'm facing is that I don't know any mean of retreiving the pts part (the slave part) of that opened master tty. There is just a C function called "ptsname", but I didn't find a script command to do the same ... Does someone know about that ?

July 19th, 2010	#7
nullzone Spilled the Beans Join Date: May 2010 Beans: 12	Re: KVM/libvirt VM console access? Another way is to define a serial console. Add a serial device to be used as a conseole in the libvirt XML file of your virtual machine (it is a device so, add that inside the <device></devices> directives): Code: <serial type="pty"> <source path="/dev/pts/3"/> <target port="1"/> </serial> Go into your Virtual machine (use ssh, vnc or anyway) and define a tty to be used as a serial console. To do this just create a new upstart script, lets say /etc/init/ttyS0.conf with this code: Code: # ttyS0 - getty # # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc RUNLEVEL=[2345] stop on runlevel [!2345] respawn exec /sbin -L 38400 ttyS0 vt102 In your core server, reload your libvirt-bin and reboot the machine (it is necesary so the kernel will detect the new serial defined previously in your VM XML file): Code: $ sudo reload libvirt-bin $ sudo virsh shutdown <your_vm_name> ... wait ... $ sudo virsh start <your_vm_name> You will see the serial in your kernel/dmesg logs after the boot as follow: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A It is all ... you have now a console defined and up-&-running. To log on in your virtual machine you can now use: Code: $ sudo virsh console <your_vm_name> ---- Aditionally, you could get the boot-messages in the console and not only a login console after the full boot just editiing inside the virtual machine the /etc/default/grub file as follow: Code: GRUB_CMDLINE_LINUX="console=ttyS0,38400n8 console=tty0" Some ppl talk about setting the GRUB_TERMINAL variable with a "serial" value so your should have a complete serial access from the beginning to the grub boot. Tbh, I havent need this yet so... if anybody have done any test I'd apreciate a clear input about how to get this working correctly. Cheers, Nullzone

July 20th, 2010	#8
Blinkiz Just Give Me the Beans! Join Date: Apr 2006 Location: Stockholm, Sweden My beans are hidden! Ubuntu	Re: KVM/libvirt VM console access? Nice guide nullzone, thanks

January 7th, 2011

Harpette

First Cup of Ubuntu

Join Date: Apr 2007

Beans: 6

Re: KVM/libvirt VM console access?

Quote:

Originally Posted by nullzone

In my (limited) experience, specifying a source path is unnecessary, since it automatically gets assigned one after you boot the vm. Also, a target port of "0" works for me.

Quote:

create a new upstart script, lets say /etc/init/ttyS0.conf

I read elsewhere a same script defined as /etc/event.d/ttyS0 ; what's the difference ? Which is better / more appropriate ?

Quote:

In your core server, reload your libvirt-bin:

$ sudo reload libvirt-bin

Don't need to do that, perhaps because i didn't specify a source path above

Other than these, thanks Nullzone for your guide which did help me much.

July 5th, 2011

#10

addihetja

First Cup of Ubuntu

Join Date: Jan 2009

Beans: 6

Re: KVM/libvirt VM console access?

I followed these directions but I still can't connect to the console:

Quote:

virsh # start Ubuntu804
Domain Ubuntu804 started

virsh # console Ubuntu804
No console available for domain

This is what I got from /var/log/libvirt/qemu/Ubuntu804.log:

Quote:

LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 2048 -smp 1 -name Ubuntu804 -uuid 3e5f089d-dc8b-a642-c108-d3408d040230 -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/Ubuntu804.monitor,server,nowait -monitor chardev:monitor -boot c -drive file=/home/truenorth/ubuntu-kvm/tmpfAmN6M.qcow2,if=ide,index=0,boot=on,format=qcow 2 -net nic,macaddr=52:54:00:ad:da:bf,vlan=0,model=virtio, name=virtio.0 -net tap,fd=55,vlan=0,name=tap.0 -chardev null,id=serial0 -serial chardev:serial0 -parallel none -usb -vnc 127.0.0.1:0 -vga cirrus
pci_add_option_rom: failed to find romfile "pxe-virtio.bin"

Here is my /etc/libvirt/qemu/Ubuntu804.xml file:

Quote:

<domain type='kvm'>
<name>Ubuntu804</name>
<uuid>3e5f089d-dc8b-a642-c108-d3408d040230</uuid>
<memory>2097152</memory>
<currentMemory>2097152</currentMemory>
<vcpu>1</vcpu>
<os>
<type arch='x86_64' machine='pc-0.12'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<serial type='tty'>
<source path='/dev/ttyS0'/>
<target port='0'/>
</serial>
<console type='tty' tty='/dev/ttyS0'>
<source path='/dev/ttyS0'/>
<target port='0'/>
</console>
<emulator>/usr/bin/kvm</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/home/admin/ubuntu-kvm/tmpfAmN6M.qcow2'/>
<target dev='hda' bus='ide'/>
</disk>
<interface type='bridge'>
<mac address='52:54:00:ad:da:bf'/>
<source bridge='br0'/>
<model type='virtio'/>
</interface>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
</video>
</devices>
</domain>

Here is my /etc/init/ttyS0.conf:

Quote:

s service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on stopped rc RUNLEVEL=[2345]
stop on runlevel [!2345]

respawn
exec /sbin -L 38400 ttyS0 vt102

There is no GUI installed on the server (which is running 11.04, btw) so I need to run virsh. I've tried all sorts of variations of this ( f.x.

本站是提供個人知識管理的網絡存儲空間，所有內容均由用戶發布，不代表本站觀點。請注意甄別內容中的聯系方式、誘導購買等信息，謹防詐騙。如發現有害或侵權內容，請點擊一鍵舉報。

轉藏 分享

QQ空間 QQ好友新浪微博微信

獻花（0） +1

來自：亞典波羅的收藏 > 《我的圖書館》

舉報/認領