• 1型六角螺母 GB/T 6170-2000
• 六角薄螺母 GB/T 6172.1-2000
• 蓋形螺母 GB/T 923-88
• 標準型彈簧墊圈 GB/T 93-87
• 內六角沉頭螺釘 GB/T 70.3-2000
• 內六角平圓頭螺釘 GB/T 70.2-2000
• 內六角圓柱頭螺釘 GB/T 70.1-2000
• 內六角凹端緊定螺釘 GB/T 80-2000
• 平墊圈 A級 GB/T 97.1-2002
• 鋼結構用高強度墊圈 GB/T 1230-91
• 鋼結構用高強度大六角頭螺母 GB/T 1229-91
• 鋼結構用高強度大六角頭螺栓 GB/T 1228-91
• 大半圓頭方頸螺栓 C級 GB/T 14-1998
• 半圓頭方頸螺栓 GB/T 12-88
• 十字槽小盤頭螺釘 GB/T 823-88
• 等長雙頭螺柱 B級 GB/T 901-88
• 十字槽沉頭螺釘 第1部分：鋼4.8級 GB/T 819.1-2000
• 十字槽盤頭螺釘 GB/T 818-2000
• 開口型扁圓頭抽芯鉚釘 GB/T 12618-90
• 圓柱銷 不淬硬鋼和奧氏體不銹鋼 GB/T 119.1-2000
• 十字槽沉頭自攻螺釘 GB/T 846-85
• 十字槽盤頭自攻螺釘 GB/T 845-85
• 小墊圈 A級 GB/T 848-2002
• 大墊圈 A級 GB/T 96.1-2002
• 六角頭螺栓 GB/T 5782-2000
• 六角頭螺栓 全螺紋 GB/T 5783-2000

所有GB標準
螺栓
• 方頭螺栓 C級 Square head bolts-Product grade C
GB/T 8-88 | UDC 621.882.6 | 代替GB8-76
• 沉頭方頸螺栓 Flat countersunk square neck bolts
GB/T 10-88 | UDC 621.882.6 | 代替GB10-76
• 沉頭帶榫螺拴 Flat countersunk nib bolts
GB/T 11-88 | UDC 621.882.6 | 代替GB11-76
• 半圓頭方頸螺栓 Cup head square neck bolts
GB/T 12-88 | UDC 621.882.6 | 代替GB12-76
• 半圓頭帶榫螺栓 Cup head nid bolts
GB/T 13-88 | UDC 621.882.6 | 代替GB13-76
• 大半圓頭方頸螺栓 C級 Cup head square neck bolts with large head-Product grade C
GB/T 14-1998 | 代替GB14-88
• 大半圓頭帶榫螺栓 Cup head nib bolts with large head
GB/T 15-88 | UDC 621.882.6 | 代替GB15-76
• 六角頭鉸制孔用螺栓 Hexagon fit bolts-product grade A and B
GB/T 27-88 | UDC 621.882.6 | 代替GB27-76
• 六角頭螺桿帶孔鉸制孔用螺栓 Hexagon fit bolts with split pin hole on shank-product grade A and B
GB/T 28-88 | UDC 621.882.6 | 代替GB28-76
• 六角頭頭部帶槽螺栓 A 和 B 級 Hexagon bolts with slot on head -product A and B
GB/T 29.1-88 | UDC 621.882.6 | 代替GB29-76
• 十字槽凹穴六角頭螺栓 Cross recessed hexagon bolts with indentation
GB/T 29.2-88 | UDC 621.882.6 | 代替GB29-76
• 下方頭螺栓 B級 Square head bolts with small head-praduct grade B
GB/T 35-88 | UDC 621.882.6 | 代替GB35-76
• T 形槽用螺栓 Bolts for T-Slot
GB/T 37-88 | UDC 621.882.6 | 代替GB37-76
• 加強半圓頭方頸螺栓 Strengthened cup head square neck bolts
GB/T 794-93 | 代替GB794-67
• 六角頭螺桿帶孔螺栓 Hexagon bolts with split pin hole on shank-product grade A and B
GB/T 31.1-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角頭螺桿帶孔螺栓 細桿 B級 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
GB/T 31.2-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角頭螺桿帶孔螺栓 細牙 A和B級 Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
GB/T 31.3-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角頭頭部帶孔螺栓 A 和 B級 Hexagon bolts with wire holes on head-product grade A and B
GB/T 32.1-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 六角頭頭部帶孔螺栓 細桿 B級 Hexagon bolts with wire holes on head-Reduced shank-product grade B
GB/T 32.2-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 六角頭頭部帶孔螺栓 細牙 A 和 B 級 Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B
GB/T 32.3-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 活節(jié)螺栓 Eye bolts
GB/T 798-88 | UDC 621.882.6 | 代替GB798-76
• 地腳螺栓 Eyelet bolts
GB/T 799-88 | UDC 621.882.6 | 代替GB799-76
• 沉頭雙榫螺 Flat countersunk double nib bolts
GB/T 800-88 | UDC 621.882.6 | 代替GB800-77
• 小半圓頭低方頸螺栓 B級 Cup head square neck bolts with small head and short neck-product grade B
GB/T 801-1998 | 代替GB801-88
• 六角頭螺栓 C級 Hexagon head bolts-product grade C
GB/T 5780-2000 | 代替GB/T 5780-1986
• 六角頭螺栓 全螺紋 C級 Hexagon head bolts-Full thread-product grade C
GB/T 5781-2000 | 代替GB/T 5781-1986
• 六角頭螺栓 Hexagon head bolts
GB/T 5782-2000 | 代替GB/T 5782-1986
• 六角頭螺栓 全螺紋 Hexagon head bolts-Full thread
GB/T 5783-2000 | 代替GB/T 5783-1986
• 六角頭螺栓-細桿-B級 Hexagon head bolts-Reduced shank -Product grade B
GB/T 5784-86 | UDC 621.882.6 | 代替GB30、21-76
• 六角頭螺栓 細牙 Hexagon head bolts with fine pitch thread
GB/T 5785-2000 | 代替GB/T 5785-1986
• 六角頭螺栓 細牙 全螺紋 Hexagon head bolts with fine pitch thread-Full thread
GB/T 5786-2000 | 代替GB/T 5786-1986
• 六角法蘭面螺栓-加大系列-B級 Hexagon flange bolts-Heavy series-product grade B
GB/T 5789-86 | UDC 621.882.6
• 六角法蘭面螺栓-加大系列-細桿-B級 Hexagon flange bolts-Heavy series-product grade B
GB/T 5790-86 | UDC 621.882.6
• 六角法蘭面螺栓 小系列 Hexagon flange bolts-Small series
GB/T 16674-1996 | 代替GB/T 5787、5788-1986
• 鋼網架螺栓球節(jié)點用高強度螺栓 High strength bolts for joints of space grid structures
GB/T 16939-1997
螺釘
• 開槽凹端緊定螺釘 Slotted set screws with cup point
GB/T 74-85 | UDC 621.882.219.4.092.6 | 代替GB74-76
• 方頭長圓柱端緊定螺釘 Square set screws with long dog point
GB/T 85-88 | UDC 621.882.2 | 代替GB85-76
• 十字槽半沉頭螺釘 Countersunk raised head screws (common head style) with cross recess
GB/T 820-2000 | 代替GB/T 820-1985
• 開槽圓柱端定位螺釘 Slotted setscrews with dog point
GB/T 829-88 | UDC 621.882.2 | 代替GB829-76
• 開槽大圓柱頭螺釘 Slotted large cheese head screws
GB/T 833-88 | UDC 621.882.2 | 代替GB833-76
• 六角頭不脫出螺釘 Hexagon screws with waisted shank
GB/T 838-88 | UDC 621.882.2 | 代替GB838-76
• 滾花高頭螺釘 Knurled thumb screws
GB/T 834-88 | UDC 621.882.2 | 代替GB834-76
• 滾花平頭螺釘 Knurled screws
GB/T 835-88 | UDC 621.882.2 | 代替GB835-76
• 滾花小頭螺釘 Knurled screws with small head
GB/T 836-88 | UDC 621.882.2 | 代替GB836-76
• 開槽盤頭不脫出螺釘 Slotted pan head screws with waisted shank
GB/T 837-88 | UDC 621.882.2 | 代替GB837-76
• 方頭短圓柱錐端緊定螺釘 Square set screws with short dog point and cone end
GB/T 86-88 | UDC 621.882.2 | 代替GB86-76
• 十字槽盤頭螺釘 Pan head screws with cross recess
GB/T 818-2000 | 代替GB/T 818-1985
• 十字槽沉頭螺釘 第1部分：鋼4.8級 Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8
GB/T 819.1-2000 | 代替GB/T 819-1985
• 十字槽沉頭螺釘 第2部分：鋼8.8、不銹鋼A2-70和有色金屬CU2或CU3 Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals
GB/T 819.2-1997
• 方頭平端緊定螺釘 Square set screws with chamfered end
GB/T 821-88 | UDC 621.882.2 | 代替GB821-76
• 十字槽圓柱頭螺釘 Cheese head screws with cross recess
GB/T 822-2000 | 代替GB/T 822-1988
• 十字槽小盤頭螺釘 Cross recessed small pan head screws
GB/T 823-88 | UDC 621.882.2 | 代替GB823-76
• 吊環(huán)螺釘 Eyebolts
GB/T 825-88 | UDC 621.882 | 代替GB825-76
• 精密機械用緊固件十字槽螺釘 Fasteners for mechanics-Cross recessed screws
GB/T 13806.1-92
• 方頭凹端緊定螺釘 Square set screws with cup point
GB/T 84-88 | UDC 621.882.2 | 代替GB84-76
• 開槽盤頭定位螺釘 Slotted pan head set setscrews with dog point
GB/T 828-88 | UDC 621.882.2 | 代替GB828-76
• 滾花頭不脫出螺釘 Knurled thumb screws with waisted shank
GB/T 839-88 | UDC 621.882.2 | 代替GB839-76
• 塑料滾花頭螺釘 Plastic diamond knurlhead screws
GB/T 840-88 | UDC 621.882.2 | 代替GB840-79
• 開槽球面圓柱頭軸位螺釘 Slotted raised head with shoulder
GB/T 946-88 | UDC 621.882.2 | 代替GB946-76
• 開槽球面大圓柱頭螺釘 Slotted large raised cheese head screws
GB/T 947-88 | UDC 621.882.2 | 代替GB947-76
• 開槽沉頭不脫出螺釘 Slotted countersunk head screws with waisted shank
GB/T 948-88 | UDC 621.882.2 | 代替GB948-76
• 開槽半沉頭不脫出螺釘 Slotted raised countersunk head screws with waisted shank
GB/T 949-88 | UDC 621.882.2 | 代替GB949-76
• 開槽長圓柱端緊定螺釘 Slotted set screws with long dog point
GB/T 75-85 | UDC 621.882.219.4.092.5 | 代替GB75-76
• 方頭長圓柱球面端緊定螺釘 Square set screws with long dog point and rounded end
GB/T 83-88 | UDC 621.882.2 | 代替GB83-76
• 開槽圓柱頭軸位螺釘 Slotted cheese head screws with shoulder
GB/T 830-88 | UDC 621.882.2 | 代替GB830-76
• 開槽無頭軸位螺釘 Slotted shoulder screws
GB/T 831-88 | UDC 621.882.2 | 代替GB831-76
• 開槽帶孔球面圓柱頭螺釘 Slotted capstan screws
GB/T 832-88 | UDC 621.882.2 | 代替GB832-76
• 開槽圓柱頭螺釘 Slotted cheese head screws
GB/T 65-2000 | 代替GB/T 65-1985
• 開槽盤頭螺釘 Slotted pan head screws
GB/T 67-2000 | 代替GB/T 67-1985
• 開槽沉頭螺釘 Slotted countersunk flat head screws (common head style)
GB/T 68-2000 | 代替GB/T 68-1985
• 開槽半沉頭螺釘 Countersunk slotted raised head screws (common head style)
GB/T 69-2000 | 代替GB/T 69-1985
• 開槽錐端緊定螺釘 Slotted set screws with cone point
GB/T 71-85 | UDC 621.882.219 | 代替GB71-76
• 開槽錐端定位螺釘 Slotted setscrews with cone point
GB/T 72-88 | UDC 621.882.2 | 代替GB72-76
• 開槽平端緊定螺釘 Slotted set screws with flat point
GB/T 73-85 | UDC 621.882.219.4 | 代替GB73-76
內六角螺釘
• 內六角花形盤頭螺釘 Hexagon lobular socket pan head screws
GB/T 2672-86 | UDC 621.882.2 | 代替GB2672-81
• 內六角圓柱頭軸肩螺釘 Hexagon socket head shoulder screws
GB/T 5281-85 | UDC 621.882.215.6
• 內六角花形沉頭螺釘 Hexagon lobular socket countersunk head screws
GB/T 2673-86 | UDC 621.882.2 | 代替GB2673-81
• 內六角花形半沉頭螺釘 Hexagon lobular socket raised countersunk head screws
GB/T 2674-86 | UDC 621.882.2 | 代替GB2674-81
• 內六角花形圓柱頭螺釘-4.8級 Hexagon lobular socket head cap screws-property class 4.8
GB/T 6190-86 | UDC 621.882.2 | 代替GB2671-81
• 內六角花形圓柱頭螺釘-8.8和10.9級 Hexagon lobular socket head cap screws-property class 8.8 and 10.9
GB/T 6191-86 | UDC 621.882.2 | 代替GB2671-81
• 內六角平端緊定螺釘 Hexagon socket set screws with flat point
GB/T 77-2000 | 代替GB/T 77-1985
• 內六角錐端緊定螺釘 Hexagon socket set screws with cone point
GB/T 78-2000 | 代替GB/T 78-1985
• 內六角圓柱端緊定螺釘 Hexagon socket set screws with dog point
GB/T 79-2000 | 代替GB/T 79-1985
• 內六角凹端緊定螺釘 Hexagon socket set screws with cup point
GB/T 80-2000 | 代替GB/T 80-1985
• 內六角圓柱頭螺釘 Hexagon socket head cap screws
GB/T 70.1-2000 | 代替GB/T 70-1985
• 內六角平圓頭螺釘 Hexagon socket button head screws
GB/T 70.2-2000
• 內六角沉頭螺釘 Hexagon socket countersunk head screws
GB/T 70.3-2000
自攻螺釘
• 十字槽半沉頭自攻鎖緊螺釘 Cross recessed raised countersunk head thread forming screws
GB/T 6562-86 | UDC 621.882
• 六角頭自攻鎖緊螺釘 Hexagon head thread forming screws
GB/T 6563-86 | UDC 621.882
• 內六角花形圓柱頭自攻鎖緊螺釘 Hexagon lobular socket thread forming screws
GB/T 6564-86 | UDC 621.882
• 十字槽盤頭自攻螺釘 Cross recessed pan head tapping screws
GB/T 845-85 | UDC 621.882.216.5.082.8 | 代替GB845-76
• 十字槽沉頭自攻螺釘 Cross recessed countersunk head tapping screws
GB/T 846-85 | UDC 621.882.216.5.082.8 | 代替GB846-76
• 十字槽半沉頭自攻螺釘 Cross recessed raised countersunk head tapping screws
GB/T 847-85 | UDC 621.882.216.5.082.8 | 代替GB847-76
• 開槽盤頭自攻螺釘 Slotted pan head tapping screws
GB/T 5282-85 | UDC 621.882.215.082.8
• 開槽沉頭自攻螺釘 Slotted countersunkhead tapping screws
GB/T 5283-85 | UDC 621.882.215.082.8
• 開槽半沉頭自攻螺釘 Slotted raised countersunkhead tapping screws
GB/T 5284-85 | UDC 621.882.215.082.8
• 六角頭自攻螺釘 Hexagon head tapping screws
GB/T 5285-85 | UDC 621.882.215.082.8
• 十字槽盤頭自攻鎖緊螺釘 Cross recessed pan head thread forming screws
GB/T 6560-86 | UDC 621.882
• 十字槽沉頭自攻鎖緊螺釘 Cross recessed countersunk head thread forming screws
GB/T 6561-86 | UDC 621.882
• 十字槽頭凹穴六角頭自攻螺釘 Cross recessed hexagon head tapping screws with indentation
GB/T 9456-88 | UDC 621.882.2
• 精密機械用緊固件十字槽自攻螺釘 刮削端 Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point
GB/T 13806.2-92
• 墻板自攻螺釘 Dry wall screws
GB/T 14210-93
• 十字槽盤頭自鉆自攻螺釘 Cross recessed pan head drilling screws with tapping screw thread
GB/T 15856.1-2002 | 代替GB/T 15856.1-1995
• 十字槽沉頭自鉆自攻螺釘 Cross recessed countersunk head drilling screws with tapping screw thread
GB/T 15856.2-2002 | 代替GB/T 15856.2-1995
• 十字槽半沉頭自鉆自攻螺釘 Cross recessed raised countersunk head drilling screws with tapping screw thread
GB/T 15856.3-2002 | 代替GB/T 15856.3-1995
• 六角法蘭面自鉆自攻螺釘 Hexagon flange drilling screws with tapping screw thread
GB/T 15856.4-2002 | 代替GB/T 15856.4-1995
• 六角凸緣自鉆自攻螺釘 Hexagon washer head drilling screws with tapping screw thread
GB/T 15856.5-2002
• 六角凸緣自攻螺釘 Hexzgon head tapping screws with collar
GB/T 16824.1-1997
• 六角法蘭面自攻螺釘 Hexagon flange head tapping screws
GB/T 16824.2-1997
木螺釘
• 開槽圓頭木螺釘 Slotted round head wood screws
GB/T 99-86 | UDC 621.882.2 | 代替GB99-76
• 開槽沉頭木螺釘 Slotted countersunk head wood screws
GB/T 100-86 | UDC 621.882.2 | 代替GB100-76
• 開槽半沉頭木螺釘 Slotted raised countersunk head wood screws
GB/T 101-86 | UDC 621.882.2 | 代替GB101-76
• 六角頭木螺釘 Hexagon head wood screws
GB/T 102-86 | UDC 621.882.2 | 代替GB102-76
• 十字槽圓頭木螺釘 Cross recessed round head wood screws
GB/T 950-86 | UDC 621.882.2 | 代替GB950-76
• 十字槽沉頭木螺釘 Cross recessed countersunk head wood screws
GB/T 951-86 | UDC 621.882.2 | 代替GB951-76
• 十字槽半沉頭木螺釘 Cross recessed raised head countersunk head wood screws
GB/T 952-86 | UDC 621.882.2 | 代替GB952-76
螺桿和螺柱
• 儲能焊用焊接螺柱 Weld studs for capacitor discharge welding
GB/T 902.3-89 | 代替GB902-76
• 等長雙頭螺柱 C級 Double end studs(clamping type)-product grade C
GB/T 953-88 | UDC 621.882 | 代替GB953-76
• 螺桿 Threaded rods
GB/T 15389-94
• 雙頭螺柱 bm=1d Double end studs-bm=1d
GB/T 897-88 | UDC 621.882 | 代替GB897-76
• 雙頭螺柱 bm=1.25d Double end studs-bm=1.25d
GB/T 898-88 | UDC 621.882 | 代替GB898-76
• 雙頭螺柱 bm=1.5d Double end studs-bm=1.5d
GB/T 899-88 | UDC 621.882 | 代替GB899-76
• 雙頭螺柱 bm=2d Double end studs--bm=2d
GB/T 900-88 | UDC 621.882 | 代替GB900-76
• 等長雙頭螺柱 B級 Double end studs(clamping type) -Product grade B
GB/T 901-88 | UDC 621.882 | 代替GB901-76
• 手工焊用焊接螺柱 Weld studs for manual welding
GB/T 902.1-89 | 代替GB902-76
• 機動弧焊用焊接螺柱 Weld studs for arc welding
GB/T 902.2-89 | 代替GB902-76
鉚釘
• 平頭鉚釘 Flat head rivets
GB/T 109-86 | UDC 621.884 | 代替GB109-76
• 標牌鉚釘 Rivets for name plate
GB/T 827-86 | UDC 621.884 | 代替GB827-76
• 半圓頭鉚釘(粗制) Round head rivets-Black
GB/T 863.1-86 | UDC 621.884 | 代替GB863-76
• 小半圓頭鉚釘(粗制) Round head rivets with small head-Black
GB/T 863.2-86 | UDC 621.884
• 平錐頭鉚釘(粗制) Cone head rivets-Black
GB/T 864-86 | UDC 621.884 | 代替GB864-76
• 沉頭鉚釘(粗制) Countersunk head rivets-Black
GB/T 865-86 | UDC 621.884 | 代替GB865-86
• 半沉頭鉚釘(粗制) Oval countersunk head rivets-Black
GB/T 866-86 | UDC 621.884 | 代替GB866-76
• 半圓頭鉚釘 Round head rivets
GB/T 867-86 | UDC 621.884 | 代替GB867-76
• 平錐頭鉚釘 Cone head rivets
GB/T 868-86 | UDC 621.884 | 代替GB868-76
• 沉頭鉚釘 Countersunk head rivets
GB/T 869-86 | UDC 621.884 | 代替GB869-76
• 半沉頭鉚釘 Oval countersunk head rivets
GB/T 870-86 | UDC 621.884 | 代替GB870-76
• 扁圓頭鉚釘 Flat round head rivets
GB/T 871-86 | UDC 621.884 | 代替GB871-76
• 扁平頭鉚釘 Thin head rivets
GB/T 872-86 | UDC 621.884 | 代替GB872-76
• 扁圓頭半空心鉚釘 Oval head semi-tubular rivets
GB/T 873-86 | UDC 621.884 | 代替GB873-76
• 120°沉頭半空心鉚釘 120 degree countersunk head semi-tubular rivets
GB/T 874-86 | UDC 621.884 | 代替GB874-76
• 扁平頭半空心鉚釘 Thin head semi-tubular rivets
GB/T 875-86 | UDC 621.884 | 代替GB875-76
• 空心鉚釘 Tubular rivets
GB/T 876-86 | UDC 621.884 | 代替GB876-76
• 120°沉頭鉚釘 120 degree countersunk head rivets
GB/T 954-86 | UDC 621.884 | 代替GB954-76
• 管狀鉚釘 Pipe type rivets
GB/T 975-86 | UDC 621.884 | 代替GB975-76
• 大扁圓頭鉚釘 Truss head rivets
GB/T 1011-86 | UDC 621.884 | 代替GB1011-76
• 120°半沉頭鉚釘 120 degree oval countersunk rivets
GB/T 1012-86 | UDC 621.884 | 代替GB1012-76
• 平錐頭半空心鉚釘 Cone head semi-tubler rivets
GB/T 1013-86 | UDC 621.884 | 代替GB1013-76
• 大扁圓頭半空心鉚釘 Truss head semi-tublar rivets
GB/T 1014-86 | UDC 621.884 | 代替GB1014-76
• 沉頭半空心鉚釘 Countersunk head semi-tublar rivets
GB/T 1015-86 | UDC 621.884 | 代替GB1015-76
• 無頭鉚釘 Headless rivets
GB/T 1016-86 | UDC 621.884 | 代替GB1016-76
• 封閉型扁圓頭抽芯鉚釘 Mushroom head break mandrel closed end blind rivets
GB/T 12615-90
• 封閉型沉頭抽芯鉚釘 120 deg flush head break mandrel closed end blind rivets
GB/T 12616-90
• 開口型沉頭抽芯鉚釘 120 deg flush head break mandrel blind rivets
GB/T 12617-90
• 開口型扁圓頭抽芯鉚釘 Mushroom head break mandrel blind rivets
GB/T 12618-90
• 扁圓頭擊芯鉚釘 Flat round head drive rivets
GB/T 15855.1-1995
• 沉頭擊芯鉚釘 Countersunk head drive rivets
GB/T 15855.2-1995
螺母
• 全金屬六角法蘭面鎖緊螺母 細牙 Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
GB/T 6187.2-2000
• 方螺母 C級 Square nuts-product grade C
GB/T 39-88 | UDC 621.882.3 | 代替GB39-76
• 六角螺母 C級 Hexagon nuts-product grade C
GB/T 41-2000 | 代替GB/T 41-1986
• 六角厚螺母 Hexagon thick nuts
GB/T 56-88 | 代替GB56-76
• 蝶形螺母 Wing nuts
GB/T 62-88 | UDC 621.882.3 | 代替GB62-76
• 環(huán)形螺母 Lifting nuts
GB/T 63-88 | UDC 621.882.3 | 代替GB63-76
• 組合式蓋形螺母 Acorn nuts
GB/T 802-88 | UDC 621.882.3 | 代替GB802-76
• 球面六角螺母 Hexagon nuts with raised face
GB/T 804-88 | UDC 621.882.3 | 代替GB804-76
• 2型六角螺母 Hexagon nuts,style 2
GB/T 6175-2000 | 代替GB/T 6175-1986
• 2型六角螺母 細牙 Hexagon nuts,style 2,with fine pitch thread
GB/T 6176-2000 | 代替GB/T 6176-1986
• 六角法蘭面螺母 Hexagon nuts with flange
GB/T 6177.1-2000 | 代替GB/T 6177-1986
• 六角法蘭面螺母 細牙 Hexagon nuts with flange-fine pitch thread
GB/T 6177.2-2000
• 1型六角開槽螺母-A和B級 Hexagon slotted and castle nuts,style 1 -product grades A and B
GB/T 6178-86 | UDC 621.882.3 | 代替GB57~58-76
• 1型六角開槽螺母-C級 Hexagon slotted nuts,style 1 -product grade C
GB/T 6179-86 | UDC 621.882.3 | 代替GB57~58-76
• 2型六角開槽螺母-A和B級 Hexagon slotted and castle nuts,style 2 -Product grades A and B
GB/T 6180-86 | UDC 621.882.3
• 六角開槽薄螺母-A和B級 Hexagon thin slotted nuts-Product grades A and B
GB/T 6181-86 | UDC 621.882.3 | 代替GB59~60-76
• 2型非金屬嵌件六角鎖緊螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 2
GB/T 6182-2000 | 代替GB/T 6182-1986
• 非金屬嵌件六角法蘭面鎖緊螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
GB/T 6183.1-2000 | 代替GB/T 6183-1986
• 非金屬嵌件六角法蘭面鎖緊螺母 細牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread
GB/T 6183.2-2000
• 1型全金屬六角鎖緊螺母 Prevailing torque type all-metal hexagon nuts,style 1
GB/T 6184-2000 | 代替GB/T 6184-1986
• 2型全金屬六角鎖緊螺母 Prevailing torque type all-metal hexagon nuts,style 2
GB/T 6185.1-2000 | 代替GB/T 6185-1986
• 2型全金屬六角鎖緊螺母 細牙 Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
GB/T 6185.2-2000
• 2型全金屬六角鎖緊螺母 9級 Prevailing torque type all-metal hexagon nuts,style 2-Property class 9
GB/T 6186-2000 | 代替GB/T 6186-1986
• 全金屬六角法蘭面鎖緊螺母 Prevailing torque type all-metal hexagon nuts with flange
GB/T 6187.1-2000 | 代替GB/T 6187-1986
• 扣緊螺母 Tight nuts
GB/T 805-88 | UDC 621.882.3 | 代替GB805-76
• 滾花高螺母 Knurled nut with collar
GB/T 806-88 | UDC 621.882.3 | 代替GB806-76
• 滾花薄螺母 Knurled nuts
GB/T 807-88 | UDC 621.882.3 | 代替GB807-76
• 小六角特扁細牙螺母 Small hexagon thin nuts-Fine pitch thread
GB/T 808-88 | UDC 621.882.3 | 代替GB808-76
• 嵌裝圓螺母 Lnsert round nuts
GB/T 809-88 | UDC 621.882.3 | 代替GB809-76
• 小圓螺母 Small round nuts
GB/T 810-88 | UDC 621.882.3 | 代替GB810-76
• 圓螺母 Round nuts
GB/T 812-88 | UDC 621.882.3 | 代替GB812-76
• 端面帶孔圓螺母 Round nuts with drilled holes in one face
GB/T 815-88 | UDC 621.882.3 | 代替GB815-76
• 側面帶孔圓螺母 Round nuts with set pin holes in side
GB/T 816-88 | UDC 621.882.3 | 代替GB816-79
• 帶槽圓螺母 Slotted round nuts
GB/T 817-88 | UDC 621.882.3 | 代替GB817-76
• 1型非金屬嵌件六角鎖緊螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 1
GB/T 889.1-2000 | 代替GB/T 889-1986
• 1型六角開槽螺母 細牙 A和B級 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B
GB/T 9457-88 | UDC 621.882.3 | 代替GB57、58-76
• 2型六角開槽螺母 細牙 A和B級 Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B
GB/T 9458-88 | UDC 621.882.3
• 六角開槽薄螺母 細牙 A和B級 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B
GB/T 9459-88 | UDC 621.882.3 | 代替GB59、60-76
• 焊接方螺母 Square weld nuts
GB/T 13680-92
• 焊接六角螺母 Hexagon weld nuts
GB/T 13681-92
• 平頭鉚螺母 Flat head riveted nuts
GB/T 17880.1-1999
• 沉頭鉚螺母 Countersunk head riveted nuts
GB/T 17880.2-1999
• 小沉頭鉚螺母 Small countersunk head riveted nuts
GB/T 17880.3-1999
• 120°小沉頭鉚螺母 120°Small countersunk head riveted nuts
GB/T 17880.4-1999
• 平頭六角鉚螺母 Flat head hexagon riveted nuts
GB/T 17880.5-1999
• 精密機械用六角螺母 Hexagon nuts for fine mechanics
GB/T 18195-2000
• 蓋形螺母 Acorn nuts
GB/T 923-88 | UDC 621.882.3 | 代替GB923-76
• 1型非金屬嵌件六角鎖緊螺母 細牙 Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread
GB/T 889.2-2000
• 1型六角螺母 Hexagon nuts,style 1
GB/T 6170-2000 | 代替GB/T 6170-1986
• 1型六角螺母 細牙 Hexagon nuts,style 1,with fine pitch thread
GB/T 6171-2000 | 代替GB/T 6171-1986
• 六角薄螺母 Hexagon thin nuts(chamfered)
GB/T 6172.1-2000 | 代替GB/T 6172-1986
• 非金屬嵌件六角鎖緊薄螺母 Prevailing torque type hexagon thin nuts(with non-metallic insert)
GB/T 6072.2-2000
• 六角薄螺母 細牙 Hexagon thin nuts(chamfered) with fine pitch thread
GB/T 6173-2000 | 代替GB/T 6173-1986
• 六角薄螺母 無倒角 Hexagon thin nuts(unchamfered)
GB/T 6174-2000 | 代替GB/T 6174-1986
墊圈
• 大墊圈 A級 Plain washers-Large series-Product grade A
GB/T 96.1-2002 | 代替GB/T 96-1985
• 大墊圈 C級 Plain washers-Large series-Product grade C
GB/T 96.2-2002 | 代替GB/T 96-1985
• 平墊圈 倒角型 A級 Plain washers,chamfered-Product grade A
GB/T 97.2-2002 | 代替GB/T 97.2-1985
• 平墊圈 用于螺釘和墊圈組合件 Plain washers for screw and washer assemblies
GB/T 97.4-2002 | 代替GB/T 9074.24、9074.25-1988
• 球面墊圈 Washers with ball face
GB/T 849-88 | UDC 621.882.4 | 代替GB849-76
• 錐面墊圈 Washers with cone face
GB/T 850-88 | UDC 621.882.4 | 代替GB850-76
• 開口墊圈 Washers with split
GB/T 851-88 | UDC 621.882.4 | 代替GB851-76
• 平墊圈 用于自攻螺釘和墊圈組合件 Plain washers for tapping screw and washer assemblies
GB/T 97.5-2002 | 代替GB/T 9074.29、9074.30-1988
• 小墊圈 A級 Plain washers-small series-Product grade A
GB/T 848-2002 | 代替GB/T 848-1985
• 工字鋼用方斜墊圈 Square taper washers for I section
GB/T 852-88 | UDC 621.882.4 | 代替GB852-76
• 槽鋼用方斜墊圈 Square taper washers for slot section
GB/T 853-88 | UDC 621.882.4 | 代替GB853-76
• 單耳止動墊圈 Tab washers with long tab
GB/T 854-88 | UDC 621.882.4 | 代替GB854-76
• 雙耳止動墊圈 Tab washers with long tab and wing
GB/T 855-88 | UDC 621.882.4 | 代替GB855-76
• 外舌止動墊圈 External tab washers
GB/T 856-88 | UDC 621.882.4 | 代替GB856-76
• 圓螺母用止動墊圈 Tab washers for round nut
GB/T 858-88 | UDC 621.882.4 | 代替GB858-76
• 輕型彈簧墊圈 Single coil spring lock washers,Light type
GB/T 859-87 | UDC 621.882.4 | 代替GB859-76
• 鞍形彈性墊圈 Curved spring washers
GB/T 860-87 | UDC 621.882.4 | 代替GB860-76
• 內齒鎖緊墊圈 Lock washers internal teeth
GB/T 861.1-87 | UDC 621.882.4 | 代替GB861-76
• 內鋸齒鎖緊墊圈 Serrated lock washers internal teeth
GB/T 861.2-87 | UDC 621.882.4
• 外齒鎖緊墊圈 Lock washers external teeth
GB/T 862.1-87 | UDC 621.882.4 | 代替GB862-76
• 外鋸齒鎖緊墊圈 Serrated lock washers external teeth
GB/T 862.2-87 | UDC 621.882.4
• 波形彈性墊圈 Wave spring washers
GB/T 955-87 | UDC 621.882.4 | 代替GB955-76
• 錐形鎖緊墊圈 Countersunk external toothed lock washers
GB/T 956.1-87 | UDC 621.882.4 | 代替GB956-76
• 錐形鋸齒鎖緊墊圈 Countersunk Serrated external toothed lock washers
GB/T 956.2-87 | UDC 621.882.4
• 特大墊圈 C級 Plain washers-Extra large series-Product grade C
GB/T 5287-2002 | 代替GB/T 5287-1985
• 重型彈簧墊圈 Single coil spring lock washers,heavy type
GB/T 7244-87 | UDC 621.882.4
• 鞍形彈簧墊圈 Curved Single coil spring lock washers
GB/T 7245-87 | UDC 621.882.4
• 波形彈簧墊圈 Wave Single coil spring lock washers
GB/T 7246-87 | UDC 621.882.4
• 標準型彈簧墊圈 Single coil spring lock washers Normal type
GB/T 93-87 | UDC 621.882.4 | 代替GB93-76
• 平墊圈 C級 Plain washers-Product grade C
GB/T 95-2002 | 代替GB/T 95-1985
• 平墊圈 A級 Plain washers-Product grade A
GB/T 97.1-2002 | 代替GB/T 97.1-1985
• 銷軸用平墊圈 Plain washers for clevis pins
GB/T 97.3-2000
擋圈
• 錐銷鎖緊擋圈 Lock rings with cone pin
GB/T 883-86 | UDC 621.885 | 代替GB883-76
• 螺釘鎖緊擋圈 Lock ring with screw
GB/T 884-86 | UDC 621.885 | 代替GB884-76
• 帶鎖圈的螺釘鎖緊擋圈 Lock rings with screw and circlip
GB/T 885-86 | UDC 621.885 | 代替GB885-76
• 軸肩擋圈 Rings for shoulder
GB/T 886-86 | UDC 621.885 | 代替GB886-76
• 螺釘緊固軸端擋圈 Lock rings at the end of shaft with screw
GB/T 891-86 | UDC 621.885 | 代替GB891-76
• 螺栓緊固軸端擋圈 Lock rings at the end of shaft with bolt
GB/T 892-86 | UDC 621.885 | 代替GB892-76
• 孔用彈性擋圈-A型 Circlips for holes-type A
GB/T 893.1-86 | UDC 621.885 | 代替GB893-76
• 孔用彈性擋圈-B型 Circlips for hole-type B
GB/T 893.2-86 | UDC 621.885
• 軸用彈性擋圈-A型 Circlips for shaft-type A
GB/T 894.1-86 | UDC 621.885 | 代替GB894-76
• 軸用彈性擋圈-B型 Circlips for shaft-type B
GB/T 894.2-86 | UDC 621.885
• 孔用鋼絲擋圈 Roundwire snap rings for hole
GB/T 895.1-86 | UDC 621.885 | 代替GB895-76
• 軸用鋼絲擋圈 Roundwire snap rings for shaft
GB/T 895.2-86 | UDC 621.885 | 代替GB895-76
• 開口擋圈 “E”rings
GB/T 896-86 | UDC 621.885 | 代替GB896-76
• 鋼絲鎖圈 Round wire circlips
GB/T 921-86 | UDC 621.885 | 代替GB921-76
• 夾緊擋圈 Grip rings
GB/T 960-86 | UDC 621.885 | 代替GB960-76
銷及鍵
• 銷軸 Clevis pins with head
GB/T 882-86 | UDC 621.886 | 代替GB882-76
• 開口銷 Split pins
GB/T 91-2000 | 代替GB/T 91-1986
• 圓錐銷 Taper pins
GB/T 117-2000 | 代替GB/T 117-1996
• 內螺紋圓錐銷 Taper pins with internal thread
GB/T 118-2000 | 代替GB?T 118-1996
• 圓柱銷 不淬硬鋼和奧氏體不銹鋼 Parallel pins,of unhardened steel and austenitic stainless steel
GB/T 119.1-2000 | 代替GB/T 119-1986
• 圓柱銷 淬硬鋼和馬氏體不銹鋼 Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)
GB/T 119.2-2000 | 代替GB/T 119-1986
• 開尾圓錐銷 Taper pins with split
GB/T 877-76 | UDC 621.886 | 代替GB877-76
• 螺紋圓柱銷 Parallel pins with external thread
GB/T 878-86 | UDC 621.886 | 代替GB878-76
• 帶孔銷 Pins with split pin hole
GB/T 880-86 | UDC 621.886 | 代替GB880-76
• 螺尾錐銷 Taper pins with external thread
GB/T 881-2000 | 代替GB/T 881-1986
• 內螺紋圓柱銷 不淬硬鋼和奧氏體不銹鋼 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
GB/T 120.1-2000 | 代替GB/T 120-1986
• 內螺紋圓柱銷 淬硬鋼和馬氏體不銹鋼 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
GB/T 120.2-2000 | 代替GB/T 120-1986
• 彈性圓柱銷 直槽 輕型 Spring-type straight pins-Slotted,light duty
GB/T 879.2-2000
• 彈性圓柱銷 直槽 重型 Spring-type straight pins-Slotted, heavy duty
GB/T 879.1-2000 | 代替GB/T 879-1986
• 彈性圓柱銷 卷制 重型 Spring-type straight pins-Coiled,heavy duty
GB/T 879.3-2000
• 彈性圓柱銷 卷制 標準型 Spring-type straight pins-Coiled,standard duty
GB/T 879.4-2000
• 彈性圓柱銷 卷制 輕型 Spring-type straight pins-Coiled,light duty
GB/T 879.5-2000
• 槽銷 平行溝槽 Crooved pins-Parallel grooved
GB/T 13829.1-92
• 槽銷 錐銷 Crooved pins-taper grooved
GB/T 13829.2-92
• 槽銷 圓頭 沉頭 Grooved pins-with round head or countersunk head
GB/T 13829.3-92
組合件和連接副
• 十字槽半沉頭螺釘和錐形鎖緊墊圈組合件 Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T 9074.10-88 | UDC 621.882
• 十字槽凹穴六角頭螺栓和彈簧墊圈組合件 Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies
GB/T 9074.12-88 | UDC 621.882
• 十字槽凹穴六角頭螺栓、彈簧墊圈和平墊圈組合件 Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies
GB/T 9074.13-88 | UDC 621.882
• 鋼結構用高強度大六角頭螺栓 High strength bolts with large hexagon head for steel structures
GB/T 1228-91 | 代替GB1228-84
• 鋼結構用高強度大六角頭螺母 High strength large hexagon nuts for steel structures
GB/T 1229-91 | 代替GB1229-84
• 鋼結構用高強度墊圈 High strength plain washers for steel structures
GB/T 1230-91 | 代替GB1230-84
• 鋼結構用扭剪型高強度螺栓連接副 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T 3632-1995 | 代替GB3632-83
• 螺栓或螺釘和平墊圈組合件 Bolt or screw and washer assemblies with plain washers
GB/T 9074.1-2002 | 代替GB/T 9074.1、9074.14-1988
• 十字槽頭螺釘和外鋸齒鎖緊墊圈組合件 Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T 9074.2-88 | UDC 621.882
• 十字槽盤頭螺釘和彈簧墊圈組合件 Cross recessed pan head screw and single coll spring lock washer assemblies
GB/T 9074.3-88 | UDC 621.882
• 十字槽盤頭螺釘、彈簧墊圈和平墊圈組合件 Cross recessed pan head screw, single coil spring lock washer assemblies
GB/T 9074.4-88 | UDC 621.882
• 十字槽小盤頭螺釘和平墊圈組合件 Cross recessed small pan head screw and small plain washer assemblies
GB/T 9074.5-88 | UDC 621.882
• 十字槽小盤頭螺釘和大墊圈組合件 Cross recessed small pan head screw and big plain washer assemblies
GB/T 9074.6-88 | UDC 621.882
• 十字槽小盤頭螺釘和彈簧墊圈組合件 Cross recessed small pan head screw and single coil spring lock washer assemblies
GB/T 9074.7-88 | UDC 621.882
• 十字槽小盤頭螺釘、彈簧墊圈和平墊圈組合件 Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies
GB/T 9074.8-88 | UDC 621.882
• 十字槽沉頭螺釘和錐形鎖緊墊圈組合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T 9074.9-88 | UDC 621.882
• 十字槽凹穴六角頭螺栓和平墊圈組合件 Cross recessed hexagon bolt with indentation and plain washer assemblies
GB/T 9074.11-88 | UDC 621.882
• 六角頭螺栓和彈簧墊圈組合件 Hexagon head bolt and single coil spring lock washer assemblies
GB/T 9074.15-88 | UDC 621.882
• 六角頭螺栓和外鋸齒鎖緊墊圈組合件 Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T 9074.16-88 | UDC 621.882
• 六角頭螺栓、彈簧墊圈和平墊圈組合件 Hexagon head bolt,single coil spring lock washer and plain washer assemblies
GB/T 9074.17-88 | UDC 621.882
• 自攻螺釘和平墊圈組合件 Tapping screw and washer assemblies with plain washers
GB/T 9074.18-2002 | 代替GB/T 9074.18、9074.19、9074、22、9074、23-1988
• 十字槽凹穴六角頭自攻螺釘和平墊圈組合件 Cross recessed hexagon head tapping screw with indentation and plain washer assemblies
GB/T 9074.20-88 | UDC 621.882
• 十字槽凹穴六角頭自攻螺釘和大墊圈組合件 Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies
GB/T 9074.21-88 | UDC 621.882
• 組合件用彈簧墊圈 Single coil spring lock washer for assembly
GB/T 9074.26-88 | UDC 621.882
• 組合件用外鋸齒鎖緊墊圈 Serrated lock washer external teeth for assembly
GB/T 9074.27-88 | UDC 621.882
• 組合件用錐形鎖緊墊圈 Lountersunk external toothed lock washer for assembly
GB/T 9074.28-88 | UDC 621.882
• 腰狀桿螺柱連接副型式分類 Connections with waisted stud-Tape classification
GB/T 13807.1-92
• 腰狀桿螺柱連接副螺柱 Connections with waisted stud-Studs
GB/T 13087.2-92
• 腰狀桿螺柱連接副螺母、受力套管 Connections with waisted stud-Nuts,extension sleeves
GB/T 13087.3-92
• 栓接結構用大六角頭螺栓 螺紋長度按GB/T 3106 C級 8.8和10.9級 Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
GB/T 18230.1-2000
• 栓接結構用大六角頭螺栓 短螺紋長度 C級 8.8和 10.9級 Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9
GB/T 18230.2-2000
• 栓接結構用大六角頭螺母 B級 8和10級 Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10
GB/T 18230.3-2000
• 栓接結構用1型大六角螺母 B級 10級 Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
GB/T 18230.4-2000
• 栓接結構用平墊圈 淬火并回火 Plain washers for high-strength structural bolting hardened and tempered
GB/T 18230.5-2000
• 栓接結構用1型大六角螺母浸熱 鍍鋅(加大攻絲尺寸) A和B級 5.6和8級 Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8
GB/T 18230.6-2000
• 栓接結構用2型大六角螺母浸熱 鍍鋅(加大攻絲尺寸) A級 9級 Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9
GB/T 18230.7-2000
焊釘
• 無頭焊釘 Headless studs for stud welding
GB/T 10432-89
• 電弧螺柱焊用圓柱頭焊釘 Cheese head studs for arc stud welding
GB/T 10433-2002 | 代替GB/T 10433-1989