前幾天發(fā)了個《高拋低吸》指標，回帖的人不少，說是無法引入，其實是你沒有設置參數的原因。原帖已刪除，現在把參數直接加入到指標里，你復制粘貼到技術指標里，設置為副圖就可以了。圖已附后。
源碼如下：
{RSI-CCI-KD}
100,POINTDOT;
-100,POINTDOT;
{input:N(9,2,100),M(14,1,100),N1(6,2,100);}
TYP := (HIGH + LOW + CLOSE)/3;
CC1:(TYP-MA(TYP,9))/(0.015*AVEDEV(TYP,9)),ColorFF00FF;
C1:=SMA(CC1,3,1);
C2:=SMA(C1,3,1);
C3:=3*C1-2*C2;
CB1:=EMA(C3,5);
CB2:=REF(CB1,1);
FILLRGN(CC1,100,CC1>100),Color38FF00;
FILLRGN(CC1,-100,CC1<-100),COLOR00AAFF;
LC := REF(CLOSE,1);
RSI1:=SMA(MAX(CLOSE-LC,0),14,1)/SMA(ABS(CLOSE-LC),14,1)*100;
RSI:(RSI1-50)*5,LINETHICK2,ColorFFFFFF;
R1:=SMA(RSI,3,1);
D1:=SMA(R1,3,1);
J1:=3*R1-2*D1;
RR1:=EMA(J1,5);
RR2:=REF(RR1,1);
RR:=RR1>RR2;
RSV:=(CLOSE-LLV(LOW,6))/(HHV(HIGH,6)-LLV(LOW,6))*100;
K:=SMA(RSV,3,1);
K1:(K-50)*5,ColorFFFF00;
K2:=SMA(K1,3,1);
D2:=SMA(K2,3,1);
J2:=3*K2-2*D2;
BB1:=EMA(J2,5);
BB2:=REF(BB1,1);
買入:RR AND NOT(REF(RR,1)) AND (RR1<-100 AND BB1<-100) AND CB1<-100,LINETHICK0;
DRAWICON(買入,-200,7),ALIGN0;
賣出:REF(RR,1)=1 AND NOT(RR) AND CB1>100,LINETHICK0;
DRAWICON(賣出,200,8),ALIGN0;
